Mortar Mix

Product Description

Atria Mortar Mix is a premixed cement mortar, sand and additives for general masonry work where good short term strength is required. Ideal for installation of thick base layers and placement of blocks or bricks.

Properties

  • Easy Application
  • Excellent Manageability
  • Fast Hardening

Color

Atria Mortar Mix is available in gray color.

Mixture

It should be mixed manually or mechanically with enough water at a speed of 150 rpm to obtain a homogeneous mass free of lumps.

Instructions

Read the MSDS sheet before using the Atria Mortar Mix

Installation

The support must be strong and well set and clean of dust, paint, oil, etc. If it is exposed to the sun or if it is very absorbent, it is advisable to moisten it in advance. It should not be applied to paints, plaster or surface without absorption.

Storage

Store it free of moisture in its original packaging. Do not allow water to come into contact with the product until it is in use.

Precautions and Warnings

Precautions for safe handling should be taken as required by OSHA’ Respirator Standard (29 CFR 1910.134) and ANSI’ Standard for Respiratory Protection
(Z88.2).Proper ventilation is required. A dust mask or filter mask is recommended in poorly ventilated areas with a NIOSH approved respirator. It is a recommended to wear eye protection goggles as well as the protection of gloves of adequate size to protect the skin from splashes. Avoid contact with eyes, skin or clothing. This product containts silica and cement. Direct and prolonged contact may cause silicosis. According to animal studies, it may be carcinogenic. This mortar contains Portland cement and may have detectable amounts of chemicals that could cause cancer, birth defects, or other reproductive harm.Cement, slurry, or foodstuffs. Remove contaminated clothing and wash hands before handling food or contact with eyes and skin. If eye contact occurs, flush eyes with plenty of water several times and consult a physician if necessary. Do not allow this material to enter drains or sewers. Dispose of the material in accordance with the regulations. This substance is harmful if swallowed. If ingested accidentally rinse mouth, DO NOT CAUSE VOMITING. KEEP OUT OF REACH OF CHILDREN

Technical Data

Coverage

Meets and exceeds the requirements of ASTM C-270 for type “N” mortar.

Warranty

Atria Industries Corp. Warrants the good performance of this product for the purpose it was created only within 90 days from the date of manufacture. Atria Industries Corp. only responsibility will be to replace the product considered to be defective by Atria Industries Corp. after a written claim is received along with samples of the material. Atria Industries Corp. does not provide any other kind of warranty including any warranty of merchantability or fitness express or implied. The user is the only responsible of determining the proper and suitable use of the product. Under no circumstances Atria IndustriesCorp. will be responsible for damages of any kind or nature. Atria industries Corp. only responsibility will be to replace the product considered to be defective by Atria Industries Corp.